can be varied from fine increments of 1% up
to larger steps of 5% via incremental encoder or PC; fast settings in 20%
steps
Interfaces
Trigger In 5–24 V, USB, RS232, footswitch
Pulse and Strobe mode
Can be controlled via Software or voltage
signal; max. frequency 10 kHz; min. switch on / switch off width 20 μs; delay
adjustable; overcurrent of LED possible in flash mode
Housing
Aluminium anodized, IP 20
Cooling
Active via ultra-low-noise fan
Weight
approx. 3 kg
Dimensions
235 x 148 x 108 [mm] (L x W x H)
1) active fibre diameter 9-13 mm
2) max. dicline of light output to 70% of
original level